Skip to main content
5 min read

Setting Up Netatmo Energy

This guide will help you connect your Netatmo Energy products to SmartMixin so you can monitor your heating data alongside your weather data.

What Is Netatmo Energy?

Link to this section

Netatmo Energy is Netatmo's smart heating system, which includes the Smart Thermostat and Smart Radiator Valves. By connecting Netatmo Energy to SmartMixin, you can view temperature readings, heating schedules, and setpoint temperatures right next to your weather station data.

Separate from Netatmo Weather

Link to this section

Netatmo Energy is a separate integration from Netatmo Weather. Even if you have already connected your Netatmo Weather Station in SmartMixin, you still need to connect Netatmo Energy separately. The two integrations use different API scopes, so they operate independently.

You can connect one or both -- it's entirely up to you.

Before you begin:

  • You have a Netatmo Energy product (Smart Thermostat or Smart Radiator Valves) set up in the Netatmo Energy app
  • Your Netatmo account has Energy products linked to it
  • Your Energy devices are online and transmitting data

Connection Steps

Link to this section

On the Mobile App

Link to this section
  1. Go to Settings > Weather Services > Netatmo Energy
  2. Tap Get started, then Connect
  3. You'll be redirected to Netatmo's authorization page
  4. Log in with your Netatmo credentials and authorize SmartMixin to access your Energy data
  5. You'll be redirected back to SmartMixin

On the Web App

Link to this section
  1. Go to Settings > Weather Services > Netatmo Energy
  2. Click Get started, then Connect
  3. You'll be redirected to Netatmo's authorization page
  4. Log in with your Netatmo credentials and authorize SmartMixin to access your Energy data
  5. You'll be redirected back to SmartMixin

That's it! Your Netatmo Energy data will start appearing in SmartMixin.

Available Data

Link to this section

Once connected, SmartMixin can access the following data from your Netatmo Energy devices:

  • Temperature readings from your thermostats and radiator valves
  • Setpoint temperatures (your target temperatures)
  • Heating schedules configured in the Netatmo Energy app

Room Status Icons

Link to this section

In the mobile app, each room on the Netatmo Energy dashboard is drawn as a circle. A small icon in one of its corners tells you what the room is doing:

  • Hand (top left): the room is on a manual temperature instead of its schedule
  • Warning sign (top right): Netatmo can't reach the room's thermostat or valve
  • Clock (bottom left): the room has started heating early so it reaches its next scheduled temperature on time
  • Wind (bottom right): Netatmo has detected an open window in the room and paused its heating for a while

While a room shows the warning sign, the clock and wind icons are hidden: Netatmo can only report what the room was doing before it went out of reach.

Already Connected Netatmo Weather?

Link to this section

If you have already connected your Netatmo Weather Station, you still need to connect Netatmo Energy separately. They are independent integrations that use different API scopes. Connecting one does not grant access to the other.

Troubleshooting

Link to this section

My homes or thermostats don't appear after connecting

Link to this section

After authorising SmartMixin, your homes should populate within a few seconds. If they don't show up:

  1. Confirm in the Netatmo Energy app that your homes and devices are online
  2. In the mobile app, leave the Netatmo Energy screen and open it again. From version 1.65, it checks Netatmo for your homes each time it opens
  3. If the homes still don't appear, disconnect and reconnect Netatmo Energy from Settings > Weather Services > Netatmo Energy — reconnecting forces a fresh sync of your homes

Netatmo Energy says your account connection has expired

Link to this section

If the Netatmo Energy screen in the mobile app, or the Netatmo Energy page in the web app's settings, says "Your account connection has expired. Please reconnect to resume data updates.", Netatmo no longer accepts SmartMixin's access to your account. Your homes and thermostats are fine: reconnect, and they come back.

  1. Go to Settings > Weather Services > Netatmo Energy
  2. Click Reconnect and sign in to Netatmo again

I see Weather modules but not Energy devices (or vice-versa)

Link to this section

Netatmo Weather and Netatmo Energy are separate integrations with different API scopes. Connecting one does not grant access to the other. Connect both from Settings > Weather Services if you want both kinds of data in SmartMixin.

To disconnect Netatmo Energy from SmartMixin:

  1. Go to Settings > Weather Services > Netatmo Energy
  2. Tap or click Disconnect
  3. Confirm with Disconnect

This will remove SmartMixin's access to your Energy data but won't affect your Netatmo account or your Energy devices.

If something doesn't look right, check out Troubleshooting Common Issues for help.

Was this article helpful?


Related Articles

Still need help?

If this article didn't answer your question, I'm happy to help you directly.

Contact support