Choosing Your Netatmo Dashboard Layout

Your Netatmo dashboard comes in two layouts, and you can switch between them at any time. Both show exactly the same measurements — only the arrangement changes.

Card list is the default. If you own an outdoor module, a wind gauge and a rain gauge, all three are on the same scroll instead of behind a swipe.

You can also switch from the dashboard itself: open the menu in the top-right corner and tap Switch to Classic (or Switch to Card list). Your choice applies to every Netatmo station on this device.

You choose the order your modules appear in, and which ones appear at all.

1. On the dashboard, open the menu in the top-right corner and tap Customize
2. Drag a module by its handle to move it within Outdoor or within Indoor — a module always stays in its own section
3. Tap the eye icon to hide a module; it moves to Hidden, and tapping the eye again brings it back to where it was

Your order applies to both layouts: in Card list it is the order of the cards, and in Classic the order of the tabs, with the first module the one each pane opens on. One module in each section always stays visible, so its eye icon cannot be tapped. A Netatmo favourite shows only its outdoor modules, so only Outdoor is listed for it.

With VoiceOver or TalkBack, focus a module and use the Move up and Move down actions instead of dragging; the app tells you the new position after each move.

The order is saved for each station. When you're signed in it syncs to your other devices, as your other dashboard layouts do (see Customizing Your Dashboard). A module you pair later appears at the end of its section.

Each card carries one physical module:

• The current reading, with its trend arrow
• Today's highest and lowest, each with the time it happened
• The module's other measurements — humidity, pressure, CO2 or noise, depending on the module
• A health line: the battery percentage, the signal strength, and when the module last reported

In Card list, your outdoor, wind and rain modules each carry their own colour, so you can tell them apart without reading the names. Classic shows that colour on the tabs instead, since only one of those modules is on screen at a time.

The health line at the bottom of each card is the quickest way to see why a reading looks wrong.

Tip: A module showing Not reachable has usually lost its radio link, not its battery. Moving it closer to the base station, or away from thick walls and large metal objects, normally restores it. The card keeps showing the last values it received so you can see how long ago that was.

In the Classic layout only one module is on screen at a time, so any other module that needs looking at carries a small amber dot on its tab.

A tablet shows your cards and a chart side by side. Tapping a measurement on a card draws it in the chart, and in Card list the highlighted card is the one the chart is showing — feels-like is the exception, since tapping that switches it to the dew point instead. Held upright, a large tablet puts your outdoor modules on the left and your indoor ones on the right with the chart underneath; a smaller one stacks everything in a single column.

Both layouts work on a tablet, and the chart keeps its place either way. Classic puts its two panes — outdoor and indoor — where the card list would go: stacked in the left-hand column in landscape, and side by side above the chart when you hold the tablet upright and there is room for both. In Classic the chart follows the card you are looking at, so switching a pane to another module redraws it. Your order applies here too: the chart starts on the first module in your order, and the highlighted card follows it.

Indoor cards describe the CO2 reading in words as well as a number:

A room that reaches Stale simply needs airing — open a window for a few minutes and the reading falls quickly.

• Connect or reconnect your station with Setting Up Netatmo Weather Station
• Readings missing or out of date? See Netatmo Data Merge and Missing Data

---

Related Articles

• Setting Up Netatmo Weather Station
• Netatmo Data Merge and Missing Data
• Customizing Your Dashboard