Skip to main content
12 min read

Weather Station Reports & Analysis

SmartMixin offers a variety of reports and analyses to help you understand your weather data. Most reports are available with a Premium subscription, and the reports you see depend on which sensors your station has.

How to Access Reports

Link to this section
  • Mobile app: Open a station, then tap the Analysis tab
  • Webapp: Open a station, then click the Analysis tab

Reports are grouped by category -- Outdoor, Temperature, Wind, Rain, Solar, Agromet, and more -- so you can quickly find the analysis you need.

Report Catalog

Link to this section

Outdoor Reports

Link to this section

Available for every station; the Required Sensor column says what each report needs.

ReportDescriptionRequired Sensor
Records & climateAll-time records -- the temperature low and high, the Wettest day, the Strongest wind gust, the pressure low and high and the Minimum humidity, each with its date and, where the station records it, the time -- climate normals, the warmest and coldest years of each month and the last full year's climate indicatorsAny
On this day in historyEvery year's low, high and rain on one calendar date (today's, unless you pick another), against the normal for that date, with the date's Record high, Record low and Wettest dayTemperature or rain
Monthly Outdoor ReportMonthly summary with min/max/avg temperature, humidity, pressure, and rain totalsTemperature
Annual Outdoor ReportYearly summary with the same statisticsTemperature
Annual Outdoor ComparisonCompare outdoor data year-over-year to spot trendsTemperature

Records & climate

Link to this section

The records need no particular sensor: the card shows the records your station's sensors have set, so a station without a temperature sensor still shows its pressure, rain or wind-gust records.

When the national weather service publishes the station's daily high and low, read from maximum and minimum thermometers, and that value is more extreme than the one worked out from hourly readings, the record shows it with an Official value tag: tap or click the ⓘ (About these records) to see both values. The Wettest day row always shows two totals, because a day of rain can be counted two ways. The amount on top, labelled Calendar day (midnight to midnight), counts from midnight to midnight at the station. The line below, Climatological day (06–06 UTC), gives the wettest day counted from 06:00 to 06:00 UTC, as weather services count it. The two can split the same storm differently, so their totals can differ, and sometimes their dates too; when both fall on the same day, the line below repeats the date.

On this day in history

Link to this section

The year-by-year chart needs temperature: a station that measures only rain lists every year's rain on that date instead. When the national weather service publishes the station's daily high and low (the official values described under Records & climate above), those values also fill in the years the station's own readings don't cover, and each year shows the more extreme of the two. A year without a rain reading from the station itself shows the service's rain, counted from 06:00 to 06:00 UTC.

When older years are still on their way

Link to this section

When SmartMixin imports a Netatmo station's history from Netatmo, it does so a little at a time, most recent years first, over several days. Until the import is complete, Records & climate and On this day in history show fewer years than your station has, and a note on the report says so: "Your station's older history is still being imported. More years will appear over the next few days." The note goes away when the import is complete. You don't need to do anything.

Temperature Reports

Link to this section
ReportDescriptionRequired Sensor
Temperature & Feels likeCompare actual temperature with perceived temperature (humidex, heat index, or apparent temperature)Temperature + Humidity
Dew point, Temperature & HumidityCombined analysis of dew point, temperature, and humidity over timeTemperature + Humidity
Year-to-date temperature comparisonCompare average temperatures across yearsTemperature
ReportDescriptionRequired Sensor
Monthly Wind ReportWind speed statistics and direction distribution for a given monthWind sensor
Wind runTotal distance traveled by wind over time -- useful for agriculture and evapotranspiration estimatesWind sensor
ReportDescriptionRequired Sensor
Cumulative rainfallRunning total of precipitation throughout the yearRain gauge
Annual Cumulative Rainfall ComparisonCompare cumulative rainfall across yearsRain gauge
ReportDescriptionRequired Sensor
Monthly solar reportMonthly solar radiation and energy statisticsSolar radiation sensor
Annual solar reportAnnual solar energy totalsSolar radiation sensor

Agromet Reports

Link to this section
ReportDescriptionRequired Sensor
Grassland temperature sumCumulative degree-days above a base threshold -- used to track vegetation growth stagesTemperature
Annual water balancePrecipitation vs. evapotranspiration over the year -- helps monitor soil moisture and irrigation needsRain gauge + Evapotranspiration sensor

Grassland temperature sum -- How It Works

Link to this section

The Grassland temperature sum chart adds up, day by day since January 1st, each day's mean temperature above 0 °C (32 °F). January days count for half and February days for three quarters, because mild winter days do little for grass. The curve is labelled Growing degree days.

The total is in degree-days: °C·d, or °F·d if you use Fahrenheit. A March day averaging 8 °C adds 8 °C·d, so a total of 180 °C·d is not a temperature of 180 °C.

The dashed horizontal line marks the threshold of 200 °C·d (360 °F·d), labelled Start of vegetation: 200 °C·d. Once the sum passes it in spring, the sustainable start of vegetation has been reached: grass starts growing for good, and it is usually time to spread the first fertiliser. A vertical line marks the date the threshold was reached. The chart always leaves room above the threshold line, so it stays in view even early in the year.

Tip: The 200 °C·d threshold was established for grassland in Central Europe. Elsewhere, read it as a guide rather than a rule.

Annual water balance -- How It Works

Link to this section

The Annual water balance chart displays three elements for each month of the year:

  • Rain bars (blue, upward from zero) -- monthly precipitation
  • Evapotranspiration bars (orange, downward from zero) -- monthly water loss through evaporation and plant transpiration
  • Balance line -- cumulative difference between rain and evapotranspiration since the start of the year

A positive balance means your soil has received more water than it has lost, while a negative balance indicates a water deficit -- useful for planning irrigation.

By default, the cumulative balance resets to zero on January 1st. If you want a more continuous picture, turn on the Carry over toggle above the chart. It adds the previous year's final water balance as the starting point for the year you are viewing. The toggle's label names that previous year and its final balance -- the amount it would carry over, shown even while the toggle is off -- for example "Carry over 2025 (-150.3 mm)". The chart only starts from that amount once you turn the toggle on.

Tip: The carry-over only considers one year back (starting from zero on January 1st of the previous year). It does not accumulate across multiple years.

Indoor Reports (Netatmo Weather Only)

Link to this section
ReportDescriptionRequired Sensor
Monthly ReportMonthly indoor climate statistics (temperature, humidity, CO2)Netatmo indoor module
Annual ReportAnnual indoor climate summaryNetatmo indoor module
Annual Indoor ComparisonCompare indoor climate year-over-yearNetatmo indoor module

Other Features

Link to this section
FeatureDescriptionRequired
Station comparisonChart your station against one other station from your list, on the same chartPremium subscription + another station in your list
Forecast ComparisonView multiple forecast models side-by-side to make your own predictionsPremium subscription
Export dataExport your weather data as XLSX files via email for further analysisPremium subscription

Station comparison

Link to this section

Station comparison puts your station and one other station side by side on the same chart. It is available on every station's Analysis tab and needs a Premium subscription.

  1. Open the report. The Select a station to compare with list opens straight away.
  2. Pick a station. The list holds your own other stations only: there is no search, so you can't compare with a station that isn't in your list, and stations you have hidden are not offered. A station that no longer reports stays in the list, because its history can still be compared.
  3. Choose what to compare: in the webapp with Measure to display above the chart, in the mobile app with the metric icons next to it.

To compare with a different station, open the list again from the other station's name: a button above the chart in the webapp, a bar at the bottom of the screen in the mobile app.

Only the measurements both stations report are offered. Rain is compared over the finest accumulation period the two stations share, so that both totals cover the same hours. That can be coarser than one of the stations' own finest period: for example, 3-hour totals rather than hourly ones. If the two stations share no rain period, rain is not offered.

If you have only one station, there is nothing to compare it with: the webapp shows No Stations Found and the mobile app's list is empty; closing it takes you back. Connect a second station first -- see Connecting Your Weather Station.

Changing the Period

Link to this section

Most reports cover a month or a year. Use the arrows on either side of the period above the chart to go to the previous or next one, or tap or click the period itself to pick another month or year. Cumulative rainfall and Station comparison also let you change the scale -- a day, a week, a month, a year or a rolling window -- as on the Charts tab: see Browsing Your Station's History. In the mobile app, Wind run does too; in the webapp it always shows a year. The year-on-year comparisons (Annual Outdoor Comparison, Year-to-date temperature comparison and Annual Cumulative Rainfall Comparison) show every year since the station's history begins, up to the last ten years, so they have no arrows and nothing to pick. Records & climate and Export data cover no period at all. On this day in history opens on today's date at your station. To look at another day, tap or click the date above the report: Pick a day lets you choose a month and a day, and Today brings you back. It has no arrows.

How Complete Is the Period?

Link to this section

On the web, a strip of small squares sits under the period of most reports: one square per day of the month, or one per month of the year. A filled square has data, a hatched one has none, and today's is outlined. The line beside it says what the report's figures cover, for example Month to date, Readings on 26 of 30 days or No readings 18–21 Jun. When the measurements do not all have the same days -- a station whose thermometer stopped while it kept sending pressure -- the line names them, for example Temperature, Humidity, and Rain: 6 of 31 days · Pressure: every day. The figures themselves are always computed from the days that have data, so a month with few readings is a summary of those days only.

In the monthly table, a run of days with no reading at all is one row, No readings. The arrow back to the previous period stops at the first month or year your station has data for. The mobile app does not show the strip yet.

Why Don't I See a Report?

Link to this section

If a report is missing from your Analysis tab, here are the most common reasons:

  • Missing sensor -- The report requires a sensor your station doesn't have. Check the "Required Sensor" column in the tables above.
  • No Premium subscription -- Some reports require a Premium subscription. See Premium Features for details on what's included.
  • New station -- If your station was recently connected, historical data may not be available yet. Give it some time to collect enough data for meaningful reports. If SmartMixin is importing a Netatmo station's older history, more years arrive over a few days (see When older years are still on their way above).

Tip: You can check which sensors your station has in Managing Your Sensors.

Netatmo Energy Reports

Link to this section

If you use Netatmo Energy (thermostat and valves), heating reports are covered in a separate article. See Netatmo Energy Reports & Analysis for details on heating analysis and energy statistics.

Link to this section

Was this article helpful?

Still need help?

If this article didn't answer your question, I'm happy to help you directly.

Contact support